Видео

Just started with my 5 Pro, having fun. Now I will be looking for a bowl bit. One observation though. You tend to use Carbide Create as a generic phrase when often you are talking about Carbide Create Pro. Many of us can't at the moment afford the Pro version and it does have features not available in the standard version. It would be helpful if you state up front that you are talking about the Pro version. Thanks.

Will this work with the Shapeoko 3?

I want to do that!

This is awesome! How much would you charge for one?

does carbide work with onefinity machines?

what is your ist name? mate, can you do a video for us computer newbies, a shortcut list of the key to use to speed up the programing with detail explanation, I know it's a big task but for you it will be piss easy (oops Ausie slang), gradually getting use to programing but not so easy soon looking at getting your latest 5 pro, to replace my shapeoko 3pro, sent to Australia. All the best mate

Every time I see this "Richlite" material, I think of chocolate with some sort of cookie inside. lol...

Was thinking I was not smart enough and too old to learn CNC. You have me rethinking that. Thank You!

All of this video might aswell be in a foreign language, i purchased the latest cnc the pro 5 from yourselves but I don't have a single clue as to what to do. Needless to say I do not have a clue what to do when it comes down to computers and how to succeed in the cnc world, it all confuses me no end. Can you please tell me what the best thing to do actually is now that I managed to put the cnc together. Do i need to do something to the bed of the cnc to lower the thickness of the mdf, if so what and more over how 🫣😳. I'm definitely a total dummy when it comes down to the cnc world and how to make them actually work🫣🤔. Please can you point me in the right direction otherwise it's going to endup one hell of a expensive paperweight. 😳🫣🤯. Many thanks in advance for any help you can offer me!!!

I followed pretty well till he said to use the "heal command" and I can not find it?? Where is is?

I will definitely be using those features

what is the heel comand?

Kitboga is that you?

HELLOOO

Thank you! I could not understand why dragging to select elements worked differently at times - dragging up or dragging down was the missing parameter I needed to know. That small detail will streamline my selection process in tightly arranged designs.

Heal command? Pressing Heal? Looking..... looking... not finding Heal command... pressing H doesn't do it. Using v774.

Please make the layers dialog a pinnable/dockable pane or at least allow us to select geometry with the window still open with a stay on top behavior. And add hotkeys in () to the tooltips.

Thanks for the info 🎉🎉🎉

Great tips

That looks like a core box bit to me, not a bowl bit.

Wtf

Great video ! 👍

I learned so much from this video. I ran into a few roadblocks on my current project and this video answered multiple key things I've been trying to figure out. I know not everyone loves the long format videos but they're often times packed with the smaller details that are frequently skipped in shorter videos. Hat tip to you, Kevin. Thanks for putting this together.

@carbide3d How did you finish those trays? Mineral oil, lacquer, rub-on wax? They look amazing and I want the same results! Thanks!

can you please show how to up grade to the latest version of 7, thank you

Thank you for all the videos you have done.

Just finished building mine and besides a few missing screws which I was able to substitute with the spare ones, only one issue remained. The grounding block should come with 2 M4x30 screws, but mine are M4x35 so the block won’t tighten since the extra few mm are enough to bottom them out before the block tightens. No big deal, I’ll make them shorter with the Dremel tomorrow and that should do the trick. Might want to check on that though since I am probably not the only one who got the wrong ones.

Love this video!🎉

Hey, if I send you measurements, can you make me an ingot mode for silver? 😊$$$

Cool, what is your tool using

I have the old shapeoko 3 and love your later 5 but I have major problem learning the carbide create software, I would love to get a one on one learning but I am in Australia, can that be done?, I am prepared to fly to USA to properly get to learn, can you help, thanks

I like the vibe lol

Those pac-mans are so good. Didn't know it was just spray painted aluminium. Going to give it a shot.

So this machine used to come with the router and now it does not? Plus its 100 dollars more.

pathetic only for 120v, how about for the 240 v world, we do exist, please

How much?

Kevin, would you accept a bribe in exchange for a video on tramming the Shapeoko 5 Pro? I just got my machine set up and running a couple weeks ago and I bought the recommended Edge Mini Pro Tram System, but I'm afraid (or possibly too lazy) to use it. You guys have a video (with Winston) from like 5 years ago, but the equipment's all different. Even if the principles are the same, it's knowing which screws to fiddle with that's giving me pause.

My 5 Pro 4x4 has been sitting in its boxes since Jan 23 cause I don't have space to install it yet. 😥

So serial in the build video haha.

Hi I am on the first page and it won't allow me to press connect to cutter or press settings nothing happening please can you help

Do you have the basic tool library for fusion360 also? In metric. I know it’s not a carbide create problem. But that will be cool

How did you get the stl file from Carbide Create to the CNC machine for printing? I can't find a command in Carbide Create. Do you use another program that talks to the CNC machine to print to it?

What is needed to add air assist? Also Is it measured in cfm or psi?

More than two dollars for a penny 🤔

How long did it take to cut and engrave this piece?

Er, are you serious about the Pac-Man earrings? Was that a joke? They looked absolutely terrible 😂

man, i love those tiny vises at 1:49.

Hi.i have a question. How do u create different depth pockets to cut out on your cnc. For example u have a 20mm thick stock and cut a 5mm pocket out, then need to cut different shapes pockets another 5mm in to the stock?

Hello, what is the density of the EVA foam you use? What is its hardness rating?

Interesting! I assume that's aluminum, but a single or double flute bit?